Bench & BobbinA journal for people who make
Studio visit / Material studies

Made by patient hands.

Step inside working studios where a useful object begins with a sketch, a test piece and an afternoon at the bench. Meet the makers sharing what they learned.

Explore studio stories ↗
Studio visit / Material studies editorial photograph
BENCH & BOBBIN   /   2026
Studio visitNovember 2026 edition

Studio stories

Browse the index ↘
Tool Reviews

A pencil worth keeping close

A broad carpenter's pencil leaves a readable mark on rough stock. A finer drafting point suits a pattern intended for repeated tracing.

Project Showcase

A notebook stitched by hand

Maker Ellis Tran begins each book with a folded paper model. The creative process lets the spine width emerge from the number of signatures.

Material Guides

Choosing cloth for a cover

A tightly woven cloth produces crisp corners on a small case. Looser fabric may need a backing before adhesive touches the surface.

From the desk

Workbench

Before cutting the final material, make a small sample with the same grain or weave. The sample can tell you how an edge behaves under pressure.

Keep the offcut with a note about tools and finish. Over time those scraps become a handmade reference library.

Estimate cover cloth

Measure the laid-flat cover, including its spine. Add the turn-in allowance on all four edges to calculate your cutting dimensions.

Bench & Bobbin index

A pencil worth keeping close

Try both on the material you plan to use. The best mark remains visible while working and comes away cleanly at the end.

A notebook stitched by hand

Test the pattern design on scrap card. Punch the fold over a soft backing so the holes line up without tearing.

Choosing cloth for a cover

Wrap a sample around one corner and let it dry. Check for glue bleed and bulk before committing a full sheet.

Bench & Bobbin